How To Clean a Tea Kettle In Six Different & Easy Methods!
Are you concerned with your mineral deposit build-up in your tea kettle? Now, there is no need to worry because there are several natural remedies that you can use to clean your kettle at home.
Mineral deposit occurs because we usually use tap water, and that contains minerals. And as the water boils, some of those minerals get left behind and stick to the bottom of the tea kettle. That build-up is not hygienic, and it also spoils the taste of tea.
It seems a little challenging to clean the tea kettle by merely washing it in the sink, but you can get rid of it pretty easily just by following one of the following methods and you will be fine.
Below you have listed various methods that you can use to make the kettle a brand crystal clean just like new one.
You can follow any process that you think is easy for you.
How to clean a tea kettle!
Below we have tried to answer some of the very commonly asked questions regarding cleaning a tea kettle!
How to clean a tea kettle from inside?
You can clean your tea kettle using six different very easy to follow methods. Follow whichever is easy for you!
1. Using Vinegar For Cleaning Kettle
There is a very beneficial element that you can routinely get in every house, and it could be applied to dispose of mineral deposits and that is white vinegar.
- Fill the kettle with a mixture composed of vinegar and water.
- It would be best if you take equal volumes of the liquids.
- Once you have finished, boil the diluted vinegar and, after that, let that hot mixture remain in our kettle.
- Put it aside to cool for about an hour.
- The debris will lose its place, and when you have done this, dispose of the mix.
- Use any small brush or sponge to clear any stuck debris and wash it with fresh water.
- Here the kettle is ready to use.
2. Using Citric Acid For Cleaning Kettle
Another alternative to clean your tea kettle is by working with citric acid next to the vinegar solution.
These naturally occurring elements are incredibly efficient at breaking down gunk and grime.
You hardly require any Citric Acid to execute this process.
- You can start by filling the kettle halfway with water and boil it.
- Later, when the water boils, add 1 to 2 tablespoons citric acid and let the mixture rest for 15 to 20 minutes.
- Drain off the water and scrub with a sponge as needed.
- Last, rinse the debris out of the kettle and wash it with dish soap.
3. Using Lemon Juice For Cleaning Kettle
Lime is excellent for getting rid of mildew, mold, and bacteria. You can use 1-2 lemons for cleaning out the junk inside the tea kettle. It is an effortless method which you can perform at home.
- Fill the kettle with water and include half a cup of lemon juice in it.
- Cover the kettle and allow it to rest overnight.
- Later, in the morning, you will see that most of the junk would have broken up. However, if you don’t prefer to stand by for a night, you can also boil the mixture within the kettle.
- Keep boiling it for about 10 minutes, and the effect would be a lot better.
4. Using a Mixture of Acids For Cleaning Kettle
If you want some instant, significant effects on the tea kettle, then you can use this method.
For that, you require…
- Mild dish soap
- White vinegar
- Baking soda
Usually, we have access to all of these things in our kitchen. This method will deeply clean our kettle and clear all the debris inside it.
- Start by adding 1/4 cup white vinegar and 2 cups water to the kettle
- Then put it on the side for 20 minutes.
- That is for descaling mineral deposits that have built up in our kettle.
- You can add about two tablespoons baking soda and two tablespoons lemon juice for deep cleaning.
- Now add an extra cup of water and put it on the burner to boil.
- Boil the mixture for 30 minutes, making sure that there is always water inside the kettle.
- Let the hot kettle cool, then rinse it thoroughly with fresh water.
- Use a sponge to scrub away any grease and grime.
- You can also use this mixture to clean the outside of the kettle if there is any rust on it.
- Wash the kettle properly with fresh water and dry it using a towel or else. Here you are ready to use the brand-new kettle.
5. Using Soft Drinks For Cleaning Kettle
Frizzy drinks are known for their wondrous cleaning powers like Coca-Cola or Pepsi. Due to their carbonic acids, they can also be used to descale our kettle and is very powerful against fighting limescale.
For this, you only need any fizzy drinks or soda.
- Fill the kettle with 1 cup of drink and add 2 tablespoons of baking soda to it.
- Put it on the burner and boil it for 30 minutes.
- Now let the kettle cool and then use any scrubber to remove the deposits.
- Now you can wash it thoroughly with a dishwasher and freshwater.
- Let the kettle dry so can start using it.
6. Using Baking Soda For Cleaning Kettle
Here is another convenient option for cleaning the tea kettle, and that is using baking soda. You can use this instead of all the other methods. It is also quite useful and easy to go.
- Take a tablespoon of baking soda in the water and mix it.
- Now pour this solution into the kettle. (It is not like previous methods)
- This time, you do not have to boil it up.
- Just let it soak for about 20 minutes.
- That will cause the debris to lose and enough to make it easy to scrub.
- Now take a scrubber or sponge and begin cleaning the litter.
- It will come out of its place.
- Use fresh water to wash the kettle and dry it with a towel or else.
- Here the kettle is ready.
How to remove rust from the tea kettle?
When the water rests for a long time inside or outside the tea kettle, It turns to cause rust on the surface.
That rust is not easy to dispose off with a regular dishwasher.
Here we have the solutions to this problem, so no need to worry about that.
Following are some simple home remedies that will work great in cleaning up tea kettles that have rust on them.
Moreover, you do not need to worry about ingredients too.
All the ingredients used in these methods are available in our kitchen. So start cleaning your kettles by following any of the below methods.
Baking soda is the most delicate thing that you can have to get rid of the rust from items like a tea kettle. You can use this method if you do not feel like using vinegar, even though it is quite handy.
For this method, you need baking soda and any regular dishwasher.
- Pick up a minor amount of baking soda on the slightly soaked scrub and add two dishwasher drops.
- Start rubbing the area where you can see rust.
- Now put some baking soda on those areas and let it rest for around 5-10 minutes.
- After that again, give a little scrub and wash it with fresh water.
- Use a towel to clean it, and then your kettle is ready.
VINEGAR & LIME SOLUTION
As you all know, vinegar acts effectively in cleaning and removing stains and as well as for rust from tea kettles. So here you can add lime to it for better and healthy results.
With these two ingredients, you can clean rust from the kettle.
- For the outside, you can start by putting vinegar on those areas where you can see rust.
- Use lemon and cut it into two pieces.
- Take one-half start scrubbing those areas.
- You can also add more amount of vinegar if required.
- Scrub it for 5-10 minutes, and you can also use a scrubber to clean it more nicely.
- Now wash it with a dishwasher and freshwater.
- Don’t forget to dry it with a piece of towel.
- If you want to clean the inside, you can simply apply the vinegar method by boiling water, vinegar, and lime solution.
- And then wash it with clean water.
- You can also damp a paper towel with white vinegar, and wipe the entire thing off.
How to clean a tea kettle with vinegar?
Whenever you have to clean your tea kettle, of course, you will see for something useful. Below you will find the most excellent and practical technique you can use to clean the debris formed inside the tea kettle.
Using vinegar is the simplest thing you can do to fix this problem. You have noted several ways of using vinegar, and you can practice any of them to have significant results.
Distilled vinegar is an excellent acidic compound for getting rid of those nasty scales that are formed inside the tea kettle.
To remove it, you simply need one ingredient, which is already available in the our kitchen and that is vinegar, which is effective enough to get rid of that debris from tea kettle.
- Pick up the kettle, add two cups of water and half a cup of white vinegar to it.
- Place it on the burner and set it on high.
- Bring it to a boil and let it boil for ten minutes.
- Now shut off the burner and remove the kettle from heat and allow it to cool.
- After it is cold, pour the water to refill with fresh water and put it on the burner to boil again.
- Further cook for ten minutes and then shut that off.
- Let it cool, then pour out the water and wash the kettle with mineral water.
- You can use a sponge to clear away any debris left behind.
- The kettle should be fit to work with clear up of all the mineral deposits.
*Point to note* – If you see that the buildup is too much and the solution doesn’t begin to get it off, you should increase the amount of vinegar and boil it once again
How to clean tea kettle of mineral deposits?
When you keep using your tea kettles and do not take care of them, a layer of mineral deposits will create inside the kettle. That is because water contains minerals, and when you boil water, it leaves those minerals behind on the kettle’s surface.
If you do not wash your tea kettle, so much of mineral deposits will build up and it is not healthy for you as you make tea/coffee in it.
So, you need to clear that deposit, and for this task, you can apply many methods by using the household things. We list some of them below.
You need a distilled white vinegar and Scrubby brush (like a bottle brush)/microfiber cloth. That is enough for the most uncomplicated procedure.
- Start by combining equal parts of vinegar and water in a measuring cup and then pour it into the kettle.
- Now turn on the kettle and let the solution boil.
- Keep boiling for 5 minutes and turn the kettle off and let it cool.
- Start cleaning the outside of the kettle by Dipping your microfiber cloth into the mixture and use it to wipe the kettle’s exterior.
- You can use the brush to give the inside a scrub.
- Make sure you get all the corners!
- Lastly, rinse with water and pour out the dirt.
- Boil a pot of plain water once and dump it.
- This is good at removing any remaining vinegar odor or taste.
Instead of using vinegar, you can also take advantage of the lemon available in the kitchen to clean your tea kettle. Lemons are a useful source for getting rid of mineral deposits. For this necessary process, you only require lemons.
- You should start by squeezing a full lemon into a pot full of water and pour the resulting mixture inside the kettle.
- Cut the lemon into additional pieces and placed them in as well.
- The next step is to boil the mixture.
- Once you are through, let it rest there and absorb the deposit for about an hour straight.
- Discharge the water afterward and wash off the buildup with a silicon sponge or with a towel, depending on the demand.
- That is something convenient and relatively simple to do.
For this method, you can have the following things.
- A cup of distilled vinegar,
- Baking soda,
- Kitchen Timer,
- Measuring Spoon or Cup,
- Dish soap,
- Dish towel,
- Plastic, or metal scrubber.
You can use this method for the detailed cleaning of your kettle.
Now that you have all the list items, let’s get to work.
- Add around half a cup of water instantly into the teapot and pour in roughly a similar measure of vinegar.
- Start boiling and let it simmer for 10 minutes.
- Add three tablespoons of baking soda to the solution once you’ve moved it away from the stove.
- It will fizz once the soda hits the vinegar.
- This is a natural reaction, so nothing to be worried about.
- Use a scouring brush or sponge to clear out any debris.
- Now wash the entire thing with a dishwasher and freshwater.
- Lastly, rinse it and dry it up with a clean towel.
- Your tea kettle will be as great as new.
Additional Tips & Advice
The best protection is always prevention, and if you want to ensure that you never have to go through any of the above problems, you need to do proper maintenance.
Please make sure that you regularly clean the tea kettle after you use it. In this way, there will be no chance of any limescale or mineral deposits.
The best thing about all the methods mentioned above is that they are all entirely natural to some extent.
They are unlikely to cost you a dime because most likely you have the ingredients available in your kitchen.
All of these methods to clean the tea kettle are tried are tested out and are known to be very useful. We hope that you find them helpful as well.
Here are some useful tips for you to consider to avoid blunders while performing any method.
- Scouring powders are useful in removing stains from kettles effectively. Be sure to rinse it well after cleaning.
- Avoid using metallic scrubbing pads as they may scratch the surface. You can use Nylon or plastic scrubbers as they are the best.
- Never let your teapot boil dry, or it will create scorch marks, and you’ll be left with a new stain on your hands.
- Do not immerse the bottom of the electric kettle into the water as there is a heating element at the kettle’s bottom.
- Wipe out the exterior at least once a week and clean the kettle from inside once a month.
- Please don’t leave the water in the kettle after use as it tends to create more limescale and builds up. It makes your cleaning process harder.
- Don’t scrub the heating element as it takes away the coating that is there to protect it.
Enjoy your hot drinks during the cold winter days and stay good.